You are here: Home » Products » Carbon and Aramid Fiber Fabric Composite Material » Composite material &tools » Vacuum Bagging Film For Composite Material Carbon Fiber Fabric Fiberglass Cloth Infusion Forming Moulding Process

FEEDBACK
Share to:

Vacuum Bagging Film For Composite Material Carbon Fiber Fabric Fiberglass Cloth Infusion Forming Moulding Process

Quantity:

Vacuum Bagging Film For Composite Material Carbon Fiber Fabric Fiberglass Cloth Infusion and Forming Moulding Process

Details:

vacuum bag membrane is a copolymer film. It has good extensibility, barrier air and automatic demoulding, so it can be directly contacted with resin, mainly for composite material at room temperature molding, vacuum guiding and pre compaction.

technical parameter
Raw material: PA+PE+PA
Color: yellow
Thickness: 0.065mm

Width: 4 meters and 6 meters

Maximum use temperature: 170 degrees centigrade
Elongation (%): longitudinal 450 + 10% transverse 460 + 10%
Tensile strength / (Mpa): longitudinal 450 + 10% transverse 460 + 10%
Anti puncture: 1.2N


Operation Instructions:
1. should avoid the sharp object as far as possible.
2. operation to ensure the surface of the product surface water, no oil stains.

Photos:

黄2

黄3

黄4

未标题-1

JINHU JEELY SPORT

Jinhu Jeely Sport Products Co.,Ltd was established on the basis of Uhmwpe rope and fabric,and then expand to outdoor sport products.it dedicated to satisfy our customers with religious honesty and continuous innovation at all time.

QUICK LINKS

Contact Us

Company Name: Jinhu Jeely Sport Products Co.,Ltd
Address: Gongyi Road,Jinhu County,Huai'an City211600,Jiangsu Province,China
Mobile: +86 13852352792
Tel: +86 517 86853773
Email: bin@jeelysports.com
© 2019 Jinhu Jeely Sport Products Co.,Ltd. All rights reserved. Site Map Technology by leadong.com